검색 상세

광조사교합분석법을 이용한 교합면적 분석에 관한 연구

A study on the occlusal contact area using photo occlusion analysis

초록/요약 도움말

목적: 교합면적은 저작 단계에서 음식물이 분쇄될 때 중요한 요소 중 하나이며 저작효율, 선호저작측, 부기능 습관, 교정치료, 머리의 자세와 관련되어 있다고 여겨져 왔다. 본 연구의 목적은 머리의 자세, 저작 습관이나 치과적인 병력이 교합면적에 미치는 영향을 광조사교합분석법을 이용하여 조사하는 것이다. 재료 및 방법: 건전한 치열을 갖는 54명(남성 44명, 여성 10명, 23~33세)을 대상으로 시험을 진행하였다. 시험 대상은 시험 전 턱관절 질환 증상 존재 여부, 교정치료 병력 여부, 저작 시 통증 여부, 편측 저작 여부, 주관적 저작능력, 부기능 습관의 존재 등을 설문지를 통해 작성하였다. 머리의 자세와 교합면적의 관계를 알아보기 위해 시험대상은 치과용 유닛체어에 세 가지 자세(직립 자세, 기울인 자세, 누운 자세)로 하여 악간관계기록을 채득하였다. 교합면적 분석장치(BiteEye®, GC Dental Products corporation, Tokyo, Japan)를 이용하여 교합면적을 분석하였다. SPSS 25.0을 이용하여 유의수준 95%에서 통계분석을 시행하였다. 결과: 치아 간 거리 수준이 커지더라도 각 치아들의 면적 분포 비율은 변화하지 않았다(P>.05). 선호저작측은 39 μm에서 109 μm 사이의 치아 간 거리 수준에서 소구치의 면적이 유의미한 영향을 끼치는 것으로 나타났다(P<.05). 부기능 습관은 4 μm 이하의 치아 간 거리 수준에서 소구치만이 유의미한 영향을 끼치는 것으로 나타났다(P<.05). 다만, 부기능 습관이 존재하면 구치부에서 더 넓은 교합면적이 나타나는 경향성을 보였다. 자세, 교정치료 병력은 교합면적과 유의미한 영향이 없는 것으로 나타났다(P>.05). 결론: 선호저작측은 소구치의 교합면적과 유의미한 연관성이 있었으며 치아 간 거리가 약간 멀게 나타나는 위치가 밀접하게 교합되는 위치보다 연관성이 있었다. 부기능 습관은 구치부에서 더 넓은 교합접촉면적이 나타나는 경향성을 보였다.

more

초록/요약 도움말

Purpose: Occlusal contact area is considered to be an important factor in the masticatory phase when food is crushed and is influenced by masticatory efficiency, chewing side preference, parafunctional habits, orthodontic treatments, and head posture, etc. Previous studies were limited that interocclusal thickness level or the method of measurement has not been accurate in measuring occlusal contact area. The purpose of this study was to investigate the relation between occlusal contact area and various factors such as habitual factors, head posture, and dental history in detailed interocclusal thickness level. Materials and Methods: 54 subjects with complete dentition(44 men, 10 women, 23 to 33 years of age) were included. The subjects were asked to fill out with questionnaires, composing of dental histories. To identify the relationship between head posture and occlusal contact area, subjects took interocclusal record in the three different positions(upright position(90°), inclined position(135°), lying position(180°)) on the dental unit chair. Occlusal contact area was analyzed using the BiteEye®(GC Dental Products corporation, Tokyo, Japan) Statistical analyses were performed at 95% confidence interval. Results: Even though interocclusal thickness was increased, the proportion of occlusal contact area distribution for each tooth showed statistically insignificant(P>.05). Preferred chewing side had a significant effect on the area of premolar teeth at the interocclusal thickness level between 39 μm and 109 μm(P<.05). parafunctional habits only had a significant effect on the interocclusal thickness level between premolar teeth of 4 μm or less(P<.05). However, the presence of parafunctional habits tended to show a wider occlusal contact area in premolar and molar teeth. Head posture and orthodontic treatment history have no significant effect on occlusal contact area(P>.05). Conclusions: Preferred chewing side had a significant relation with occlusal contact area of premolar teeth, and was more relevant than where the distance between the teeth closely contacted. parafunctional habits tended to show a wider occlusal contact area in premolar and molar teeth.

more

목차 도움말

I. 서론 ------------------------------------------------------------- 1

II. 연구재료 및 방법------------------------------------------- 7

III. 연구결과 --------------------------------------------------- 21

IV. 고찰 --------------------------------------------------------- 45

V. 결론 ---------------------------------------------------------- 52

참고문헌 -------------------------------------------------------- 53

국문초록 -------------------------------------------------------- 59

영문초록 -------------------------------------------------------- 61

more